STM32F429ZIT6 ARM® Cortex®-M4 STM32F4 Microcontroller IC 32-Bit Single-Core 180MHz 2MB (2M x 8) FLASH 144-LQFP (20x20)

Datasheet:STM32F429ZIT6

Features

• Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

• Memories

– Up to 2 MB of Flash memory organized into two banks allowing read-while-write

– Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM

– Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, Compact Flash/NOR/NAND memories

• LCD parallel interface, 8080/6800 modes

• LCD-TFT controller with fully programmable resolution (total width up to 4096 pixels, total height up to 2048 lines and pixel clock up to 83 MHz)

• Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)

• Clock, reset and supply management

– 1.7 V to 3.6 V application supply and I/Os

– POR, PDR, PVD and BOR

– 4-to-26 MHz crystal oscillator

– Internal 16 MHz factory-trimmed RC (1% accuracy)

– 32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

• Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

• 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode

• 2×12-bit D/A converters

• General-purpose DMA: 16-stream DMA controller with FIFOs and burst support

• Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

Debug mode

– SWD & JTAG interfaces

– Cortex-M4 Trace Macrocell™

• Up to 168 I/O ports with interrupt capability

– Up to 164 fast I/Os up to 90 MHz

– Up to 166 5 V-tolerant I/Os

• Up to 21 communication interfaces

– Up to 3 × I2C interfaces (SMBus/PMBus)

– Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)

– Up to 6 SPIs (45 Mbits/s), 2 with muxed full-duplex I2S for audio class accuracy via internal audio PLL or external clock

– 1 x SAI (serial audio interface)

– 2 × CAN (2.0B Active) and SDIO interface

• Advanced connectivity

– USB 2.0 full-speed device/host/OTG controller with on-chip PHY

– USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI

– 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

• 8- to 14-bit parallel camera interface up to 54 Mbytes/s

• True random number generator

• CRC calculation unit

• RTC: subsecond accuracy, hardware calendar

• 96-bit unique ID

Data Picture:

    Terastor Electronics is a professional electronic components agent, distribution enterprise, with high quality electronic components and a variety of IC components, we have a mature business team, nearly ten years of industry experience, can handle a wide range of business, at the same time has a large amount of inventory to ensure our supply ability, we also have long-term stable suppliers, Able to provide high quality products and competitive prices to valued customers around the world.

    Our main businesses are Panasonic, Toshiba, MPS, Kioxia, Murata, Taiyo, Infineon, Renesas, Xilinx, Texas Instruments, Samsung, ADI, STMicroelectronics, NXP, Micron, Onsemi, Omron, Molex and other well-known brands, long-term supply Panasonic capacitors, Toshiba optocouplers and relays, MPS power chips, Kioxia flash and solid state drive and other original spot, as well as self-designed brand connectors.
Since its establishment, our company has always been committed to satisfying customers with complete supporting supply, to create a time-efficient, professional, convenient and all-round electronic components procurement platform for customers. With the service principle of high quality, original spot and fast delivery, we insist that quality is always the first requirement of our business. We promise that all products shipped to customers are original materials. And through the strict standard of quality control test, so far our company will be in the field of electronic components distribution to better comprehensive service to serve our customers, we sincerely look forward to working with you to create a cooperative, mutually beneficial, win-win business model.

   We trust that any enquiries and inquiries you make will be confirmed immediately, confident of our good quality and competitive prices
And sincere service can solve your purchasing needs, if you have any needs, please feel free to contact us.