SAK-TC233LP-32F200F TriCore™ - Microcontroller IC 32-Bit Single-Core 200MHz 2MB (2M X 8) FLASH PG-TQFP-100-23

Datasheet:SAK-TC233LP-32F200F

Features:

The TC23x product family has the following features:

• High Performance Microcontroller with one CPU core • Power Efficient scalar TriCore CPU (TC1.6E), having the following features: – Binary code compatibility with TC1.6P – up to 200 MHz operation at full temperature range – up to 184 Kbyte Data Scratch-Pad RAM (DSPR) – up to 8 Kbyte Instruction Scratch-Pad RAM (PSPR)

– 8 Kbyte Instruction Cache (ICACHE)

– 4 line read buffer (DRB)

• Lockstepped shadow core for TC1.6E

• Multiple on-chip memories

– All embedded NVM and SRAM are ECC protected

– up to 2 Mbyte Program Flash Memory (PFLASH)

– up to 128 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation

– 32 Kbyte Memory (LMU)

– 512 Kbyte Memory (EMEM)

– BootROM (BROM)

• 16-Channel DMA Controller with safe data transfer

• Sophisticated interrupt system (ECC protected)

• High performance on-chip bus structure

– 64-bit Cross Bar Interconnect (SRI) giving fast parallel access between bus masters, CPUs and memories

– 32-bit System Peripheral Bus (SPB) for on-chip peripheral and functional units

– One bus bridge (SFI Bridge)

• Optional Hardware Security Module (HSM) on some variants (See below)

• Safety Management Unit (SMU) handling safety monitor alarms

• Memory Test Unit with ECC, Memory Initialization and MBIST functions (MTU)

• Hardware I/O Monitor (IOM) for checking of digital I/O

• Versatile On-chip Peripheral Units

– Two Asynchronous/Synchronous Serial Channels (ASCLIN) with hardware LIN support (V1.3, V2.0, V2.1 and J2602) up to 50 MBaud

– Four Queued SPI Interface Channels (QSPI) with master and slave capability up to 50 Mbit/s

– Two MultiCAN+ Module with 3CAN nodes each and 128 free assignable message objects for high efficiency data handling via FIFO buffering and gateway data transfe

r – 4 Single Edge Nibble Transmission (SENT) channels for connection to sensors

– One FlexRayTM module with 2 channels (E-Ray) supporting V2.1

– One Generic Timer Module (GTM) providing a powerful set of digital signal filtering and timer functionality to realize autonomous and complex Input/Output management

– One Capture / Compare 6 module (Two kernels CCU60 and CCU61)

– One General Purpose 12 Timer Unit (GPT120)

– IEEE802.3 Ethernet MAC with RMII and MII interfaces (ETH)

• Versatile Successive Approximation ADC (VADC)

– Cluster of 4 independent ADC kernels

– Input voltage range from 0 V to 5.5V (ADC supply)

• Digital programmable I/O ports

• On-chip debug support for OCDS Level 1 (CPUs, DMA, On Chip Buses)

• Four/five wire JTAG (IEEE 1149.1) or DAP (Device Access Port) interface

• Power Management System and on-chip regulators

• Clock Generation Unit with System PLL and Flexray PLL

• Embedded Voltage Regulator

Data Picture:

    Terastor Electronics is a professional electronic components agent, distribution enterprise, with high quality electronic components and a variety of IC components, we have a mature business team, nearly ten years of industry experience, can handle a wide range of business, at the same time has a large amount of inventory to ensure our supply ability, we also have long-term stable suppliers, Able to provide high quality products and competitive prices to valued customers around the world.

    Our main businesses are Panasonic, Toshiba, MPS, Kioxia, Murata, Taiyo, Infineon, Renesas, Xilinx, Texas Instruments, Samsung, ADI, STMicroelectronics, NXP, Micron, Onsemi, Omron, Molex and other well-known brands, long-term supply Panasonic capacitors, Toshiba optocouplers and relays, MPS power chips, Kioxia flash and solid state drive and other original spot, as well as self-designed brand connectors.
Since its establishment, our company has always been committed to satisfying customers with complete supporting supply, to create a time-efficient, professional, convenient and all-round electronic components procurement platform for customers. With the service principle of high quality, original spot and fast delivery, we insist that quality is always the first requirement of our business. We promise that all products shipped to customers are original materials. And through the strict standard of quality control test, so far our company will be in the field of electronic components distribution to better comprehensive service to serve our customers, we sincerely look forward to working with you to create a cooperative, mutually beneficial, win-win business model.

   We trust that any enquiries and inquiries you make will be confirmed immediately, confident of our good quality and competitive prices
And sincere service can solve your purchasing needs, if you have any needs, please feel free to contact us.